Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable partsMfg Part Number: 7948
NSN : 4720-00-574-6530
NIIN : 005746530
CAGE Code : 99984
Manufacturer: Danuser Machine Co
Item Name : Hose Assembly Nonmetallic
If you’re in need of NSN parts, look no further than NSN Orbit. Owned and operated by ASAP Semiconductor, we have access to an unparalleled inventory of parts and components for the aerospace, civil aviation, defense, electronics, and industrial markets. This includes parts such as Hose Assembly Nonmetallic from Danuser Machine Co, as well as part numbers like 7948 and many more. NSN Orbit has more than two billion new and obsolete parts readily available with short lead times and competitive prices, and as we are an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, and the only independent distributor with a strict No China Sourcing Pledge, each part we sell is fully traceable or comes directly from the manufacturer.
Our website offers an array of parametric search capabilities that allow our customers to search for parts through a number of filters, one of which is the National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. NSN Orbit has a broad selection of NSN parts such as 4720005746530 from manufacturers like Danuser Machine Co. To begin the purchasing process immediately, submit an RFQ today for part number 7948.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-574-6530 Item Description: Hose Assembly Nonmetallic | 4720 | 005746530 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7948 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.562 INCHES NOMINAL 2ND END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.032 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 3.125 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 108.000 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | 9 IN. OPEN AND CLOSE WOUND SPRING GUARD ON 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPTF 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AGFF | FLANGE WIDTH | 2.218 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org" rel="nofollow") and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
